Lowrance electronic ELITE-5 HDI Manuel d'utilisateur télécharger pdf (Page 32)

Sonar Operation | Elite-5 HDI

Installation

Keel Offset

All transducers measure water depth from the

transducer to the bottom. As a result, water depth

readings do not account for the distance from the

transducer to the keel or from the transducer to the

water surface. Before setting keel oset, measure

the distance from the transducer to the lowest part

Installation menu

of the keel. If, for example, the keel is 3.5 feet below

the transducer, it will be input as –3.5 feet.

Water speed calibration

Calibrates a paddlewheel speed sensor with speed

data from a GPS source.

Temperature calibration

Calibrates data from the transducer temperature

sensor with data from a known temperature source

to ensure the accuracy of temperature information.

Reset water distance

Resets the Water Distance value to zero.

Transducer Type

Selects the transducer model attached to your unit.

You must select the correct transducer type to get

the best sonar performance from your unit.

Keel

Transducer

Keel Offset (-3.5 feet)

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 55 56

Pas de commentaire

Lowrance electronic ELITE-5 HDI Manuel d'utilisateur Page 32